LED line® Multipower 60-12 5A 60W 12V

The LED line® Multipower 60W 12V power supply is intended for use in complex installations based on LED strips. The idea of the power supply is to control simultaneously or separately, depending on the user's preference, individual lighting sections or LED light sources.  

The power supply unit has a very slim design, which enables installation even in hard-to-reach places. Installation of the PSU is extremely easy thanks to the integrated Plug&Play system. Installation and connection of the PSU does not require additional wiring. All PSU components have DuPointPlug& Play connectors. 

The design of the PSU with a depth of only 18-20 mm allows it to be easily hidden during installation.
Dimensions of the product: 187 mm x 55 mm x 18 mm. Output voltage: 12V. 
The power supply has an output of 60W and 7 output channels for sensors. 

The LED line® Multipower power supply unit offers a wide range of possibilities - control of each PSU’s channel individually or collectively the whole PSU and all its circuits simultaneously via a single selected sensor.
Installation of sensors does not require additional wiring. The sensors are integrated together with the cable and ready to be connected directly to the power supply and the LED light source.
You can control all the PSU’s channels simultaneously through one of selected sensors on the Master channel. 

Control of particular PSU’s channels takes place through use of an appropriate sensor on a specific output channel of the PSU.
It is possible to pair sensors. For example, it is possible to install a sensor on the Master channel that will act as a master of the PSU operation, cooperating with sensors installed on every output channel of the PSU.

The units are protected against short-circuit, overload and overvoltage. They are perfect for powering low-voltage installations with low power consumption.
It is also possible to install the PSU on flammable surfaces.  

The product has obtained the following certificates: CE , LVD EN62368-1, EMC EN55032, RoHS, CCC  

The PSU is intended for indoor use. The product’s ingress protection class – IP20.
The product’s housing is made of polycarbonate.  A power cord, sold separately, is required to connect the power supply to the electrical network.

The product comes with a 3-year manufacturer's warranty.