LED line® Multipower Extension Wire

2 metres long cable for LED line® Multipower power supply units. The cable allows the sensor to be installed at a greater distance from the power supply. The extension cable can be used in a series by connecting several identical cables, depending on the installation distance between the sensor and the power supply. For example: a sensor installed approximately 5 m from power supply should be connected using 2 pc. of 2 meters long extension cable, which results in total connection extension of 4 m. Additionally, the length of cable of each sensor is 1,5 m so the total installation distance of the sensor from the power supply will be 5.5 m (2 x 2 m extension cable + 1,5 m cable integrated with the sensor). 

The extension cable can be used only on the power supply output channels.